Select Page
  

project Description CS666 Advanced Principles of Cyber Security Each student is expected to choose at least ( 6-8 papers) published in 2015 or later. The research papers have to be in security policy. The students are expected to read the papers thoroughly, understand the presented problems and their proposed solutions. The deliverables of the project should include: A report in a paper format with the following sections Abstract: summary of problem statement presented in the papers.Introduction: discuss the chosen papers proposed solution. These should be illustrated using text and diagrams.Taxonomy: classification of the papers proposed solution and comparison between them.Discussion: The students have to criticize the proposed solution they also have to propose a possible solution or alternative for some of the weaknesses of the chosen papers where ever that is possible. References: The citation should follow the IEEE style. Notes: Each group should send the title of its paper as well as a half-page-description of the subject by Thursday of Week 4 (31/01/2019).Your article must obey the template guidelines in precise manner- the template is attached. Your article cannot go beyond 14 pages inclusive references.At least, five of your references must to be from journal articles published in well publishers’ databases; IEEE, Springer, Elsevier, Wiley and Taylor & Francis.
pg4_sample_word_template__1_.docx

Unformatted Attachment Preview

Don't use plagiarized sources. Get Your Custom Essay on
CS666 Information System Security policy
Just from $10/Page
Order Essay

1
Preparation of a Formatted Technical Work
for an IEEE Power & Energy Society
Transactions/Journal Publication
First A. Author, Fellow, IEEE, Second B. Author, Jr., and Third C. Author, Member, IEEE
Abstract–Basic guidelines for the preparation of a technical
work for an IEEE Power & Energy Society Transactions/Journal
Publication are presented. This document is itself an example of
the desired layout (inclusive of this abstract) and can be used as a
template. It contains information regarding desktop publishing
format, type sizes, and typefaces. Style rules are provided that
explains how to handle equations, units, figures, tables,
abbreviations, and acronyms. Sections are also devoted to the
preparation of acknowledgments, references, and authors’
biographies. The abstract is limited to 150–200 words and cannot
contain equations, figures, tables, or references. It should
concisely state what was done, how it was done, principal results,
and their significance.
Index Terms–The author shall provide up to 10 keywords (in
alphabetical order) to help identify the major topics of the paper.
The thesaurus of IEEE indexing keywords should be referenced
prior to selecting the keywords to ensure that the words selected
are acceptable. The thesaurus is posted at https://www.ieee.org/
publications/services/thesaurus-access-page.html.
NOMENCLATURE
A nomenclature list, if needed, should precede the
Introduction.
I. INTRODUCTION
T
HIS document is an example of the desired layout for a
PES Transactions/Journal paper. It contains information
regarding desktop publishing format, type sizes, and
typefaces. Style rules are provided that explain how to handle
equations, units, figures, tables, abbreviations, and acronyms.
Sections are also devoted to the preparation of
acknowledgments, references, and authors’ biographies.
Financial support should be acknowledged here. Example: This work was
supported in part by the U.S. Department of Commerce under Grant BS123.
The title should be in uppercase and lowercase letters, not all uppercase.
The name and affiliation (including city and country) of each author must
appear on the paper. Full names are preferred in the author line, but are not
required. Initials are used in the affiliation footnotes (see below). Put a space
between authors’ initials. Do not use all uppercase for authors’ surnames.
F. A. Author is with the National Institute of Standards and Technology,
Boulder, CO 80305 USA (e-mail: [email protected]).
S. B. Author, Jr., was with Rice University, Houston, TX 77005 USA. He
is now with the Department of Physics, Colorado State University, Fort
Collins, CO 80523 USA (e-mail: [email protected]).
T. C. Author is with the Electrical Engineering Department, University of
Colorado, Boulder, CO 80309 USA, on leave from the National Research
Institute for Metals, Tsukuba, Japan (e-mail: [email protected]).
II. TRANSACTIONS/JOURNAL PAPER PREPARATION
Please use automatic hyphenation and check your spelling.
Additionally, be sure your sentences are complete and that
there is continuity within your paragraphs. Check the
numbering of your graphics (figures and tables) and make sure
that all appropriate references are included.
A. Template
This document may be used as a template for preparing
your Transactions/Journal paper. You may type over sections
of the document, cut and paste into it, and/or use markup
styles.
B. Format
If you choose not to use this document as a template,
prepare your technical work in single-spaced, double-column
format, on paper 21.6×27.9 centimeters (8.5×11 inches or
51×66 picas). Set top and bottom margins to 16.9 millimeters
(0.67 inch or 4 picas) and left and right margins to about 16.9
millimeters (0.67 inch or 4 picas). Do not violate margins (i.e.,
text, tables, figures, and equations may not extend into the
margins). The column width is 88.9 millimeters (3.5 inches or
21 picas). The space between the two columns is 4.2
millimeters (0.17 inch or 1 pica). Paragraph indentation is 4.2
millimeters (0.17 inch or 1 pica). Use full justification. Use
either one or two spaces between sections, and between text
and tables or figures, to adjust the column length.
C. Typefaces and Sizes
Use a proportional serif typeface such as Times Roman or
Times New Roman and embed all fonts. Table I provides
samples of the appropriate type sizes and styles to use.
D. Section Headings
A primary section heading is enumerated by a Roman
numeral followed by a period and is centered above the text. A
primary heading should be in capital letters.
A secondary section heading is enumerated by a capital
letter followed by a period and is flush left above the section.
The first letter of each important word is capitalized and the
heading is italicized.
A tertiary section heading is enumerated by an arabic
numeral followed by a parenthesis. It is indented and is
followed by a colon. The first letter of each important word is
2
capitalized and the heading is italicized.
A quaternary section heading is rarely necessary, but is
perfectly acceptable if required. It is enumerated by a
lowercase letter followed by a parenthesis. It is indented and is
followed by a colon. Only the first letter of the heading is
capitalized and the heading is italicized.
TABLE I
Samples of Times Roman Type Sizes and Styles
Fig. 1. Magnetization as a function of applied field. (Note that “Fig.” is
abbreviated and there is a period after the figure number followed by two
spaces.)
E. Figures and Tables
Figure axis labels are often a source of confusion. Try to
use words rather than symbols. As an example, write the
quantity “Magnetization,” or “Magnetization, M,” not just
“M.” Put units in parentheses. Do not label axes only with
units. As in Fig. 1, write “Magnetization (kA/m)” or
“Magnetization (kA·m-1),” not just “kA/m.” Do not label axes
with a ratio of quantities and units. For example, write
“Temperature (K),” not “Temperature/K.” Figure labels
should be legible, approximately 8- to 10-point type.
The IEEE Graphics Analyzer Tool enables authors to prescreen their graphics for compliance with IEEE Transactions
and Journals standards before submission. The online tool is
located at http://graphicsqc.ieee.org/.
To insert images in Microsoft Word, position the cursor at
the insertion point and either use Insert | Picture | Insert Picture
from File or copy the image to the Windows clipboard and
then use Home | Paste | Paste Special | Picture. All figures and
tables must be in place in the text near, but not before, where
they are first mentioned.
Large figures and tables may span both columns, but may
not extend into the page margins. Figure captions should be
below the figures; table captions should be above the tables.
Do not put captions in “text boxes” linked to the figures. Do
not put borders around your figures. Use the abbreviation
“Fig. 1,” even at the beginning of a sentence.
F. Numbering
Number reference citations consecutively in square
brackets [1]. The sentence punctuation follows the brackets
[2]. Multiple references [2], [3] are each numbered with
separate brackets [1]-[3]. Refer simply to the reference
number, as in [3]. Do not use “Ref. [3]” or “reference [3]”
except at the beginning of a sentence: “Reference [3]
shows….”
Number footnotes separately with superscripts (References
| Insert Footnote). Place the actual footnote at the bottom of
the column in which it is cited. Do not put footnotes in the
reference list. Use letters for table footnotes.
Check that all figures and tables are numbered correctly.
Use arabic numerals for figures and Roman numerals for
tables.
Appendix figures and tables should be numbered
consecutively with the figures and tables appearing in the rest
of the paper. They should not have their own numbering
system.
G. Units
Metric units are preferred for use in IEEE publications in
light of their global readership and the inherent convenience of
these units in many fields. In particular, the use of the
International System of Units (Systeme Internationale d’Unites
or SI Units) is advocated. This system includes a subsystem of
units based on the meter, kilogram, second, and ampere
(MKSA). British units may be used as secondary units (in
parentheses). An exception is when British units are used as
identifiers in trade, such as 3.5-inch disk drive.
H. Abbreviations and Acronyms
Define less common abbreviations and acronyms the first
time they are used in the text, even after they have been
defined in the abstract. Abbreviations such as IEEE, SI, MKS,
CGS, ac, dc, and rms do not have to be defined. Do not use
abbreviations in the title unless they are unavoidable.
See Appendix A of the Author’s Kit for additional
information and standard abbreviations.
I. Math and Equations
Use either the Microsoft Equation Editor or the MathType
commercial add-on for MS Word for all math objects in your
paper (Insert | Equation or MathType Equation).
To make your equations more compact, you may use the
solidus ( / ), the exp function, or appropriate exponents.
3
Italicize Roman symbols for quantities and variables, but not
Greek symbols. Use a long dash rather than a hyphen for a
minus sign. Use parentheses to avoid ambiguities in
denominators.
Number equations consecutively with equation numbers in
parentheses flush with the right margin, as in (1). Be sure that
the symbols in your equation have been defined before the
equation appears or immediately following.
− J 3E A
2
I F = I B = − I C = A I A1 + AI A 2 + I A0 =
Z1 + Z 2
(1)
[7]
E. H. Miller, “A note on reflector arrays,” IEEE Trans. Antennas
Propagat., to be published.
Basic format for reports:
[8]
J. K. Author, “Title of report,” Abbrev. Name of Co., City of Co.,
Abbrev. State, Rep. xxx, year.
Examples:
E. E. Reber, R. L. Michell, and C. J. Carter, “Oxygen absorption in the
earth’s atmosphere,” Aerospace Corp., Los Angeles, CA, Tech. Rep.
TR-0200 (4230-46)-3, Nov. 1988.
[10] J. H. Davis and J. R. Cogdell, “Calibration program for the 16-foot
antenna,” Elect. Eng. Res. Lab., Univ. Texas, Austin, Tech. Memo.
NGL-006-69-3, Nov. 15, 1987.
[9]
where IF is the fault current.
Basic format for handbooks:
Use “(1),” not “Eq. (1)” or “equation (1),” except at the
beginning of a sentence: “Equation (1) is .…”
[11] Name of Manual/Handbook, x ed., Abbrev. Name of Co., City of Co.,
Abbrev. State, year, pp. xxx–xxx.
III. APPENDIX
Appendixes, if needed, appear before the acknowledgment.
IV. ACKNOWLEDGMENT
The following is an example of an acknowledgment.
(Please note that financial support should be acknowledged in
the unnumbered footnote on the title page.)
The authors gratefully acknowledge the contributions of I.
X. Austan, A. H. Burgmeyer, C. J. Essel, and S. H. Gold for
their work on the original version of this document.
V. REFERENCES
Examples:
[12] Transmission Systems for Communications, 3rd ed., Western Electric
Co., Winston-Salem, NC, 1985, pp. 44–60.
[13] Motorola Semiconductor Data Manual, Motorola Semiconductor
Products Inc., Phoenix, AZ, 1989.
Basic format for books (when available online):
[14] Author. (year, month day). Title. (edition) [Type of medium]. volume
(issue). Available: site/path/file
Example:
[15] J. Jones. (1991, May 10). Networks. (2nd ed.) [Online]. Available:
http://www.atm.com
Basic format for journals (when available online):
[16] Author. (year, month). Title. Journal. [Type of medium]. volume (issue),
pages. Available: site/path/file
Example:
References are important to the reader; therefore, each
citation must be complete and correct. There is no editorial
check on references; therefore, an incomplete or wrong
reference will be published unless caught by a reviewer or
discusser and will detract from the authority and value of the
paper. References should be readily available publications.
List only one reference per reference number. If a reference
is available from two sources, each should be listed as a
separate reference. Give all authors’ names; do not use et al.
Samples of the correct formats for various types of
references are given below.
[17] R. J. Vidmar. (1992, Aug.). On the use of atmospheric plasmas as
electromagnetic reflectors. IEEE Trans. Plasma Sci. [Online]. 21(3), pp.
876–880. Available: http://www.halcyon.com/pub/journals/21ps03vidmar
Basic format for books:
Basic format for reports and handbooks (when available
online):
[1]
J. K. Author, “Title of chapter in the book,” in Title of His Published
Book, xth ed. City of Publisher, Country if not USA: Abbrev. of
Publisher, year, ch. x, sec. x, pp. xxx–xxx.
Examples:
[2]
[3]
G. O. Young, “Synthetic structure of industrial plastics,” in Plastics, 2nd
ed., vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, pp. 15–64.
W.-K. Chen, Linear Networks and Systems. Belmont, CA: Wadsworth,
1993, pp. 123–135.
Basic format for periodicals:
J. K. Author, “Name of paper,” Abbrev. Title of Periodical, vol. x, no. x,
pp. xxx–xxx, Abbrev. Month, year.
Examples:
[5] J. U. Duncombe, “Infrared navigation—Part I: An assessment of
feasibility,” IEEE Trans. Electron Devices, vol. ED-11, no. 1, pp. 34–39,
Jan. 1959.
[6] E. P. Wigner, “Theory of traveling-wave optical laser,” Phys. Rev., vol.
134, pp. A635–A646, Dec. 1965.
[4]
Basic format for papers presented at conferences (when
available online):
[18] Author. (year, month). Title. Presented at Conference title. [Type of
medium]. Available: site/path/file
Example:
[19] PROCESS Corp., MA. Intranets: Internet technologies deployed behind
the firewall for corporate productivity. Presented at INET96 Annual
Meeting. [Online]. Available: http://home.process.com/Intranets/wp2.htp
[20] Author. (year, month). Title. Company. City, State or Country. [Type of
medium]. Available: site/path/file
Example:
[21] S. L. Talleen. (1996, Apr.). The Intranet Architecture: Managing
information in the new paradigm. Amdahl Corp., CA. [Online].
Available: http://www.amdahl.com/doc/products/bsg/intra/infra/html
Basic format for computer programs and electronic
documents (when available online): ISO recommends that
capitalization follow the accepted practice for the language or
script in which the information is given.
Example:
[22] A. Harriman. (1993, June). Compendium of genealogical software.
Humanist. [Online]. Available e-mail: [email protected]
Message: get GENEALOGY REPORT
4
Basic format for patents (when available online):
[23] Name of the invention, by inventor’s name. (year, month day). Patent
Number [Type of medium]. Available: site/path/file
Example:
[24] Musical toothbrush with adjustable neck and mirror, by L. M. R.
Brooks. (1992, May 19). Patent D 326 189 [Online]. Available: NEXIS
Library: LEXPAT File: DESIGN
Basic format for conference proceedings (published):
[25] J. K. Author, “Title of paper,” in Abbreviated Name of Conf., City of
Conf., Abbrev. State (if given), year, pp. xxx–xxx.
Example:
[26] D. B. Payne and J. R. Stern, “Wavelength-switched passively coupled
single-mode optical network,” in Proc. IOOC-ECOC, 1985, pp. 585–
590.
Example for papers presented at conferences (unpublished):
[27] D. Ebehard and E. Voges, “Digital single sideband detection for
interferometric sensors,” presented at the 2nd Int. Conf. Optical Fiber
Sensors, Stuttgart, Germany, Jan. 2–5, 1984.
Basic format for patents:
[28] J. K. Author, “Title of patent,” U.S. Patent x xxx xxx, Abbrev. Month,
day, year.
Example:
[29] G. Brandli and M. Dick, “Alternating current fed power supply,” U.S.
Patent 4 084 217, Nov. 4, 1978.
Basic format for theses (M.S.) and dissertations (Ph.D.):
[30] J. K. Author, “Title of thesis,” M.S. thesis, Abbrev. Dept., Abbrev.
Univ., City of Univ., Abbrev. State, year.
[31] J. K. Author, “Title of dissertation,” Ph.D. dissertation, Abbrev. Dept.,
Abbrev. Univ., City of Univ., Abbrev. State, year.
Examples:
[32] J. O. Williams, “Narrow-band analyzer,” Ph.D. dissertation, Dept. Elect.
Eng., Harvard Univ., Cambridge, MA, 1993.
[33] N. Kawasaki, “Parametric study of thermal and chemical nonequilibrium
nozzle flow,” M.S. thesis, Dept. Electron. Eng., Osaka Univ., Osaka,
Japan, 1993.
Basic format for the most common types of unpublished
references:
[34] J. K. Author, private communication, Abbrev. Month, year.
[35] J. K. Author, “Title of paper,” unpublished.
[36] J. K. Author, “Title of paper,” to be published.
Examples:
[37] A. Harrison, private communication, May 1995.
[38] B. Smith, “An approach to graphs of linear forms,” unpublished.
[39] A. Brahms, “Representation error for real numbers in binary computer
arithmetic,” IEEE Computer Group Repository, Paper R-67-85.
Basic format for standards:
[40] Title of Standard, Standard number, date.
Examples:
[41] IEEE Criteria for Class IE Electric Systems, IEEE Standard 308, 1969.
[42] Letter Symbols for Quantities, ANSI Standard Y10.5-1968.
VI. BIOGRAPHIES
A technical biography and photograph for each author may
be included. The photo should be 2.54 centimeters (1 inch)
wide by 3.18 centimeters (1.25 inches) high. The head and
shoulders should be centered, and the photo should be flush
with the left margin. The space required for the biographies
and photos is included in the eight-page limit.
The first paragraph should begin with the author’s name (as
it appears in the byline) and IEEE membership history. A
place and/or date of birth may be included (list place, then
date). Next, the author’s educational background is listed. The
degrees should be listed with type of degree in what field,
which institution, city, state, and country, and year the degree
was earned. The author’s major field of study should be lowercased.
The second paragraph uses the pronoun of the person (he or
she) and not the author’s last name. It lists military and work
experience, including summer and fellowship jobs. Job titles
are capitalized. The current job must have a location; previous
positions may be listed without one. Information concerning
previous publications may be included. Try not to list more
than three books or published articles. The format for listing
publishers of a book within the biography is: title of book
(city, state: publisher name, year) similar to a reference.
Current and previous research interests end the paragraph.
The third paragraph begins with the author’s title and last
name (e.g., Dr. Smith, Prof. Jones, Mr. Kajor, Ms. Hunter).
List any memberships in professional societies other than the
IEEE. Finally, list any awards and work for IEEE committees
and publications.
The following is a biography of Nikola Tesla as an
example.
Nikola Tesla (M’1888, F’17) was born in Smiljan
in the Austro-Hungarian Empire, on July 9, 1856.
He graduated from the Austrian Polytechnic School,
Graz, and studied at the University of Prague.
His employment experience included the
American Telephone Company, Budapest, the
Edison Machine Works, Westinghouse Electric
Company, and Nikola Tesla Laboratories. His
special fields of interest included high frequency.
Dr. Tesla received honorary degrees from
institutions of higher learning including Columbia University, Yale
University, University of Belgrade, and the University of Zagreb. He received
the Elliott Cresson Medal of the Franklin Institute and the Edison Medal of
the IEEE. In 1956, the term “tesla” (T) was adopted as the unit of magnetic
flux density in the MKSA system. In 1975, the Power Engineering Society
established the Nikola Tesla Award in his honor. He died on January 7, 1943.

Purchase answer to see full
attachment

Order your essay today and save 10% with the discount code ESSAYHSELP